• English

Product

Home > Product Center > Automatic Middle-high speed side sealing & shrink wrapping machine

Automatic Middle-high speed side sealing & shrink wrapping machine

Describe

•ESD600G is a fully automatic medium speed side sealer machine.

•The sealing part is consist of transverse sealing and side sealing, both can be lifting controlled independently. 

•The transverse sealing part is controlled by servo motor. Film cutting is uniform strength, sealing stable and fast.


•ESD600G is a fully automatic medium speed side sealer machine with the function of automatic film feeding punching, coating, sealing cutting, waste film automatically rolling in one time which is widely used in mass production packaging line.

•The sealing part is consist of transverse sealing and side sealing, both can be lifting controlled independently. We can guarantee sealing line in the middle of the product to achieve perfect sealing effect.

•The transverse sealing part is controlled by servo motor. Film cutting is uniform strength, sealing stable and fast.

•Manual adjustment film-guide system and feeding conveyor platform make the machine suitable for different width and height items.

•Side sealing part can continuous pull film sealing and cutting and product length is unlimited.

•Feeding length controls through a combination of electric eye detection and time relay to control precise film length that makes it easier to control the contraction effect.

•Waste film automatically rolling. Using independent motor control, rolling speed uniform and smooth will not too tight or too loose which can avoid break the waste film and the rewinding plate is easy disassembly.

•Using digital temperature controller which built-in PID function. Sealing blade temperature is extremely sensitive and accurate which can be set arbitrarily.

•Adopt Panasonic PLC programmable controller and WEINVIEW 7-inch man machine interface, simple operation.

•The sealing blade itself is also quipped with automatic protection function which effectively prevent from accidental cutting.

•Automatic mode and manual mode can be switched at any time which convenient to replace the shrink film.

•Applies to photo frame, picture frame, flooring, aluminum profile, wood products and other products packaging.


•BS5030LW heat shrink tunnel adopts advanced hot air circulation technology. The wind orientation can be adjusted so that the hot air in the tunnel is even, constant temperature.

•The machine uses stainless steel finned heating tube which has a long service life and high heating efficiency. 

•Chain bar conveying , using solid steel covered with durable imported silicone tube, each bar can rotate freely.

•Use of imported motor and inverter control the transmission speed which achieved step less speed regulating.

•Independent outer-hanging distribution box design to ensure the electrical components with good ventilation.

•Suitable for POF, PVC, PP, PET heat shrinkable film.


ModelESD600G
Power Supply220/380V 3PH 50/60Hz
Power
3KW
Max. Packing Size(L)Unlimited;(W+H)<530mm;(H)<200mm
Sealing Size(W)600mm
Table Height800mm
Packing Speed30~40pcs/min(Decide on product size)
Air Source6kgf/cm2
Shrink FilmPOF
Film Size(W)≤650mm;(D)≤250mm;(G)≤35KG
Sealing TypeRolled edge full closed
Machine Size(L)2060×(W)1510×(H)1305mm
Package Size(L)2100×(W)1650×(H)1550mm
G./N. Weight820/745KG


ModelBS5030LW
Power Supply220/380V 3PH 50/60Hz
Power16KW
Table Height800mm
Conveying Load30KG
Conveyor Speed1-15m/min
Tunnel SizeL1500×W500×H300mm
Overall DimensionsL1900×W1020×H1260mm
Package SizeL2000×W1120×H1410mm
G./N. Weight550/460Kg